Automatic Vision Placement Machine

Model:TP50V

TP 50V is full automatic SMT placement machine (vision operation), it is can be mounted various components by vacuum nozzle, It is the most cost effective automatic placement equipment on the market currently. This product is suitable for most of the SMD chip component 0402, SOIC, PLCC and QFP IC; visual centering system meet the placement of high precision of 0.5mm pitch QFP IC BGA and other chips. In addition to the standard round reference point, square PCB pads and ring type through-hole pad without printed solder paste can also be recognized as reference point.
 

1. The machine adopts imported precision square rail to improve placement accuracy.

2. Machine uses unique high-definition optical prism with industrial cameras to complete the visual position and placement of high-precision components

3. The one configured vision system can identify the MARK point automatically to improve production efficiency and mounting accuracy.

 4. Automatic visual programming, it is no need to input the coordinates of components by manual. Programming is simple, easy to learn for beginners and it is convenient and practical.

5. Standard configuration of automatic nozzle replacement system.

 6. Cost-effective automatic placement machine, it is most suitable for mass production and personal use.
 

lDC servo motor driving system

It uses loop DC servo motor driving system for a high precision repeating accuracy and stability.

lVision centering system

Vision centering system can mount 0.5mm pitch QFP IC

lNo-contact flying centering system

Flying centering system can mount most of SMD components include: 0402, SOIC,PLCC & QFP.

lFlexible reference point system(RPS):

In addition to standard Round reference point, square PCB pad and ring PCB pad with hole also can be identified as a reference point.

lAll-purpose automatic feeder

TP50V has 8mm, 12mm,16mm, 24mm, 32mm, you can choose to install according to your component type and your required speed.

lit uses unique Air suspended pick-and –place head design which can transmission several kinds of large and small component.

lFlexible tray-type station

TP50V can equip 2 tray which is help mount bulk components under the semi-auto mode.

lCAD/Protel data transfer

Except for study the component coordinate by Camera or keyboards input, you can choose CAD transfer software WCAD (optional) to transfer the PCB's CAD into pick and place data.

lBuffering nozzle

Buffering nozzle can adjust the pressure automatically according to different components height to avoid the damage due to different component heights or programming errors, it is suitable for various types of pick and place ceramic components and ceramic circuit board

lAutomatic PCB transmission guiderail

Improve mounting speed and accuracy.